|CNC system||SYNTEC 210MA-5E|
|Max diameter of workpiece||200 mm|
|Max grinding length||200mm|
|Max groove depth||20mm|
|Max weight of workpiece||20Kg|
|Max motor power of grinding head(Direct drive motorized spindle )||12KW|
|The size of the grinding wheels(CBN and diamond)||Φ50～Φ200mm|
|Motorized spindle revolving speed( frequency control)||0-8000rpm|
|Travel of the operating platform(X/Y/Z)||X：520 / Y：540 / Z：350|
|Linear axis rapid traverse speed||10m/min|
|Workpiece spindle revolving speed (A-axis)||200rpm|
|A-axis rotation angle||∞|
|A-axis hole cone||ISO50|
|Pneumatic clamping workpiece range||2~25mm|
|Malek chuck clamping workpiece range||3~32mm|
|Max rotation speed (C-axis)||75rpm|
|C-axis rotation range||320°（-225°~95°）|
|Workpiece spindle center height||135mm|
|Workpiece spindle runout||≤0.005mm|
|Grinding head spindle runout||≤0.005mm|
|Cylinder clamping force adjustment range||440-480kg|
|Rotating axis resolution||0.00l°|
|Cooling pump power||3P|
|Cooling tank volume||200 L|
|Source||AC 380V 50HZ (three-phase)|
|Total machine power||20KW|
|Machine weight( approximately)||5T|
Part of grinding tool show
QD580 5-axis CNC tool grinder is a newly developed by Qiandao Machinery, which is a great tool grinding center. It could produce and sharpen all kinds of milling cutters, drilling and forming tools
It looks magnificent and smart and has a much more humanism design, the entire machine operation table can be realized. Machine body is made of natural granite and that has been stable performance in the production.
The spindle grinding head adopts high rigidity, high-precision and with high power (12kw) direct drive frequency conversion. It can be installed with 2-4 pieces of flange grinding wheels. It can satisfy the technical requirement that can one time completes clamping and grinding the front, back and end face of the tool.
The main shaft adopts dd direct drive, bearing is NSK precision spindle bearing, equipped with W25 precision cylinder clamp which matches with Xiao Berlin precision chuck. The workpiece is clamped by pneumatic.
The machine tool is a 210MA-5E 5-axis SYNTEC CNC system and Japanese Igawa Servo Unit. It uses the British Renishaw LP2DD precision probe, silver precision rolling wire rail and ball screw, Hyde Han encoder of Germany. Meanwhile, in order to more ensure the process the precision of the milling tools, the rotating shaft of the machine is controlled by DD direct drive full closed loop, which makes sure that will be superior performance and great precision of the milling tools
The machine is fully enclosed appearance (front movable pull door, right and rear maintenance door) with electronic handwheel, special start and stop button and foot switch, equipped with and automatic cooling system and a coolant filter tank, an automatic lubrication device and a suction interface,an alarm buzzer, electrical box cooling air conditioner, making the operation and maintenance of machine simple and convenient.
Grinding workpiece round runout ≤0.005mm workpiece surface roughness ≤ ra0.2
Main engine of machine, SYNTEC CNC system 210MA-5E and servo unit, domestic probe,12KW precision direct drive grinding head, workpiece pneumatic clamping device, suction interface, grinding wheel blue, automatic lubrication device, standard work, automatic cooling device.
18KW Direct Drive Motor Spindle, Malek Knife Handle & Clip, Filter System, Special Fixture, Grinding Wheel, Automatic Feeding Device, British Rainesho LP2D Tester, Mapos Tester, etc.
No.6,Chongsheng East Road,Chongtou,Changan Town,Dongguan, Guangdong,China
Dongguan Qiandao Precision Machinery Manufacture Co.,Ltd. Copyright © 粤ICP备15064395号-3 Copyright Notices